GY-ADS1115 / ADS1015 16 Bits ADC Module

Description

GY-ADS1115 / ADS1015 16 Bits ADC Module is ideal for the microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC. The GY-ADS1115 / ADS1015 16 Bits ADC Module provides 16-bit precision at 860 samples / second over I2C. The chip can be configured as 4 single-ended input channels, or two as a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up small single / differential signals to the full range. This ADC is great because it can run from 2V to 5V power / logic, can measure a large range of signals and its super easy to use. It is a great general purpose 16 bit Analogue to Digital Converter.

The chip’s fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115’s connected on a single 2-wire I2C bus for 16 single ended inputs.

GY-ADS1115 / ADS1015 16 Bits ADC Module features:

Wide Supply voltage: 2.0V to 5.5V
Low current consumption: Continuous Mode: Only 150A Single-Shot Mode: Auto Shut-Down
Programable Data Rate: 8SPS to 860SPS
Internal Low-Drift Voltage reference
Internal Oscillator
Internal PGA
I2C Interface: Pin-Selectable Addresses
4 Sigle-Ended or 2 Differential inputs.
Programable Comparator
This board / chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers.

Download: GY-ADS1115 / ADS1015 16 Bits ADC Module Datasheet

Included:
1 x GY-ADS1115 / ADS1015 16 Bits ADC Module