DIY 50KG Half-bridge Body Load Cell Weighing Sensor

Description

DIY 50KG Half-bridge Body Load Cell Weighing Sensor is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends signal via the red signal wire.

Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation. You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.

When measuring, the outer side correctly applies the external force, the strain beam part of the E-shaped sensor (that is, the middle of the strain gauge is attached, the white rubberized beam arm) and the outer side should form a shear force in the opposite direction, that is, the middle The strain beam must be able to undergo bending changes under stress, and there must be no obstruction on the other side of the strain beam’s stress surface.

The DIY 50KG Body Load Cell Weighing Sensor is a set of half-bridge strain gauges, which can be used in the following three ways:

1. Use a sensor with an external resistor to form a full-bridge measurement, the range is the range of a sensor: 50kg. Higher requirements for external resistance.
2. Use two sensors to form a full bridge measurement, the range is the sum of the ranges of the two sensors: 50kgx2=100kg
3. Use four sensors to form a full bridge measurement, the range is the sum of the ranges of the four sensors: 50kgx4=200kg

Specifications:
Specification Unit Value
Capacity Kg 50
Comprehensive %F.S 0.1
Output sensitivity mv/V 1.0±15%
Nonlinearity %F.S 0.05
Repeatability %F.S 0.05
Hysteresis %F.S 0.05
Zero output mv/v ±0.3
Creep(1min) %F.S 0.1
Zero drift(1min) %F.S 0.1
Temp effecet on zero %F.S/10 0.3
Temp effecet on output %F.S/10 0.1
Input resistance Ω 1000±10
Output resistance Ω 1000±10
Insulation resistance M ≥2000
Excitation voltage V 10
Operation temp range ℃ -10 to 50
Overload capacity %F.S 150

Package includes:
1 x DIY 50KG Half-bridge Body Load Cell Weighing Sensor