100mA CC Automatic Solar Light Control Module
₦3,800
In stock
Description
Description
100mA CC Automatic Solar Light Control Module is all you need to build your own solar streetlight or garden light.
1. Using high-quality materials, the quality is guaranteed
2. Delicate and compact appearance
3. This controller can only be used for 3.7v lithium battery and 6v solar panel
4. Charge during the day, automatically turn on the light when it is dark, and automatically turn off the light when it is bright
5. Anti-backflow, constant current LED drive output, short circuit, overcharge and over discharge protection
Parameter:
Only use solar panels with an open circuit voltage of 5-7v
3.7v light board power size can be used
The working current of the 3v lamp board must be greater than the output current of the controller, otherwise the lamp will not be able to withstand it and burn the lamp
It is recommended that 6v is less than 25w for solar panels, please do not connect to solar panels greater than 6v30w
Anti-over discharge voltage 2.9v, recovery voltage 3v, anti-overcharge 4.25v, recovery charging 4.1v
Wiring:
1: Connect to LED
Notice! Distinguish positive and negative and LED operating current
2: Before connecting to the battery, be sure to measure the battery voltage between 3.5v-4.2v before connecting
It is strictly forbidden to reverse the positive and negative poles of the battery
3: When the battery is connected and the LED lights up, it means the connection is correct
If it does not light up, please disconnect the battery in time to check whether the battery voltage, LED and battery +- are reversed.
Precautions:
Use 5-7v solar panels, prohibit the use of solar panels with power greater than 8v and greater than 30w
Lithium battery +- pole is strictly prohibited to be reversed, please connect it after measurement, otherwise it may damage the controller. Only use the nominal 3.7v fully charged 4.2 or 4.3v lithium battery
If the working current of the LED is less than 600/1000ma, please use the corresponding current limiting resistor in series
Pay attention to strengthening the heat dissipation of the LED wick
Package Contents:
1 x 100mA CC Automatic Solar Light Control Module
Additional information
Additional information
Weight | 6 g |
---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.